Research
The picture from Dr.Jiajing Xie's paper was chosen as cover picture by magazine
    The picture from Dr.Jiajing Xie's paper which published in Applied Optics was chosen as cover picture by magazine.

 

Achievements
  • Paper
  • Patent
  • Software Copyright

    • • List of major core journal papers in 2015
    1 . Jiajie Pei, Jiong Yang, Renjing Xu, Yong-Hui Zeng, Ye Win Myint, Shuang Zhang, Jin-Cheng Zheng, Qinghua Qin, Xibin Wang, Wugui Jiang, Yuerui. Exciton and Trion Dynamics in Bilayer MoS2. Small, 2015, 48(11): 6384–6390.
       2 . Li Jiao, Xibin Wang, Yubo Qian, Zhiqiang Liang, Zhibing Liu. Modelling and analysis for the temperature field of the machined surface in the face milling of aluminium alloy. The International Journal of Advanced Manufacturing Technology, 2015, 81(9): 1797-1808.
       3 . Wang Q, Liang Z, Wang X, et al. Fractal analysis of surface topography in ground monocrystal sapphire. Applied Surface Science, 2015, 327:182-189.
       4 . Wang T, Xie L, Wang X. Simulation study on defect formation mechanism of the machined surface in milling of high volume fraction SiCp/Al composite. International Journal of Advanced Manufacturing Technology, 2015, 79(5):1-10.
       5 . Dong Z, Jiao L, Wang X, et al. FEA-based prediction of machined surface errors for dynamic fixture-workpiece system during milling process. International Journal of Advanced Manufacturing Technology, 2015:1-17.
       6 . Wang T, Xie L, Wang X, et al. PCD tool performance in high-speed milling of high volume fraction SiCp/Al composites. International Journal of Advanced Manufacturing Technology, 2015, 78(9-12):1-9.
       7 . Tianfeng Zhou, Jiwang Yan, Zhiqiang Liang, Xibin Wang, Ryuichi Kobayashi, Tsunemoto Kuriyagawa. Development of polycrystalline Ni–P mold by heat treatment for glass microgroove forming, Precision Engineering, Vol. 39 (2015), pp.25-30.
       8 . Wang Qiuyan, Liang Zhiqiang*,Wang Xibin, Zhao Wenxiang,Wu Yongbo. Fractal Analysis of Surface Topography in Ground Monocrystal Sapphire. Applied Surface Science, 2015,327:182-189
       9 . Wang Qiuyan, Liang Zhiqiang*,Wang Xibin, Zhao Wenxiang,Wu Yongbo. Fractal Analysis of Surface Topography in Ground Monocrystal Sapphire. Applied Surface Science, 2015,327:182-189
       10 . Biao Liu, Zhibing Liu, Xibin Wang, Zhenghu Yan. Three-dimensional Stability Lobe for Assuring the Whole Stability in Thin-walled Workpiece Milling[C]. Journal of Mechanical Engineering • Proceedings of the 16th International Manufacturing Conference in China, 2015-1: 355-360.
       11 . Tao Wang, Lijing Xie , Xibin Wang. Simulation study on defect formation mechanism of the machined surface in milling of high volume fraction SiCp/Al composite. The International Journal of Advanced Manufacturing Technology , 2015, 79(5): 1185-1194.
       12 . Tao Wang, Lijing Xie , Xibin Wang, Zhiwei Ding. PCD tool performance in high-speed milling of high volume fraction SiCp/Al composites. The International Journal of Advanced Manufacturing Technology, 2015, 78(9):1445-1453.
       13 . Shenwang Li, Xibin Wang, Lijing Xie , Siqin Pang, Song Peng, Zhiqiang Liang, Li Jiao. The milling–milling machining method and its realization. The International Journal of Advanced Manufacturing Technology , 2015, 76(5):1151-1161.
       14 . Jiao, L; Wang, XB ; Qian, YB; Liang, ZQ ; Liu, ZB. Modelling and analysis for the temperature field of the machined surface in the face milling of aluminium alloy. The International Journal of Advanced Manufacturing Technology, 2015, 81(9-12): 1797-1808.
       15 . Zhaohui Dong, Li Jiao, Xibin Wang, Zhiqiang Liang, Zhibing Liu, Jie Yi. FEA-based prediction of machined surface errors for dynamic fixture-workpiece system during milling process. The International Journal of Advanced Manufacturing Technology, 2015.
       16 . Yi, J ; Jiao, L; Wang, XB; Xiang, JF ; Yuan, MX ; Gao, SF. Surface Roughness Models and Their Experimental Validation in Micro Milling of 6061-T6 Al Alloy by Response Surface Methodology. Mathematical Problems in Engineering, 2015.
    • • List of major core journal papers in 2014
    1 . Li S, Wang X, Xie L, et al. The milling–milling machining method and its realization. International Journal of Advanced Manufacturing Technology, 2014, 76(5-8):1151-1161.
       2 . Zhang H, Wang X, Pang S. A Mathematical Modeling to Predict the Cutting Forces in Microdrilling. Mathematical Problems in Engineering, 2014, 2014(3):1-11.
       3 . ZHOU Tianfeng, MA Lizheng, LIANG Zhiqiang, WANG Xibin. Modeling and Simulation of Surface Topography Evolution in Electrical Discharge Machining (EDM), Advanced Materials Research Vol. 1017 (2014) pp 764-769.
       4 . Wang Qiuyan, Liang Zhiqiang*, Wang Xibin, Zhao Wenxiang, Wu Yongbo, Jiao Li, Xie LiJing. A Three-dimensional Fractal Analysis Method for Ground Monocrystal Sapphire Surface. Advanced Materials Research, 2014, 1017:187-192. (EI)
       5 . Ma Liping, Zhao Wenxiang, Liang Zhiqiang*, Wang Xibin, Xie Lijing, Jiao Li, Zhou Tianfeng. An investigation on the mechanical property changing mechanism of high speed steel by pulsed magnetic treatment. Materials Science And Engineering A, 2014, 609: 16-25.
       6 . Wang Qiuyan, Zhao Wenxiang, Liang Zhiqiang*, Wang Xibin, Wu Yongbo, Jiao Li. Research on Fractal Characterization in Grinding of Monocrystal Sapphire. Materials Science Forum, 2014, 800-801:186-190. (EI).
       7 . Ma Liping, Zhao Wenxiang, Liang Zhiqiang*, Wang Xibin, Xie Lijing, Jiao Li, Zhou Tianfeng. An investigation on the mechanical property changing mechanism of high speed steel by pulsed magnetic treatment. Materials Science And Engineering A, 2014, 609: 16-25.
       8 . Liang Zhiqiang, Wang Xibin, Wu Yongbo, Jiao Li, Zhao Wenxiang, Zhou Tianfeng. Grinding Force Characteristics in Elliptical Ultrasonic Assisted Grinding (EUAG) of Monocrystal Sapphire. International Journal of Abrasive Technology, 2014. (EI)
       9 . Liang Zhiqiang*,Jian Hongchao,Wang Xibin,Zhao Wenxiang,Zhang Suyan,Otani, Yusuke,Xue Siyi. A 5-axis coordinated CNC grinding method for the flank of a non-coaxial helical micro-drill with the cylinder grinding wheel,Advanced Materials Research,654-659,Kailua, HI, United states,2014.9.22-2014.9.25. (EI)
       10 . Liang Zhiqiang*,Mi Zhaoyang,Wang Xibin,Zhou Tianfeng,Wu Yongbo,Zhao Wenxiang,Numerical investigations on the grinding forces in ultrasonic assisted grinding of SiC ceramics by using SPH method,Advanced Materials Research, 735-740,Kailua, HI, United states,2014.9.22-2014.9.25. (EI)
       11 . Wang Qiuyan, Liang Zhiqiang*, Wang Xibin, Zhao Wenxiang, Wu Yongbo, Jiao Li, Xie LiJing. A Three-dimensional Fractal Analysis Method for Ground Monocrystal Sapphire Surface. Advanced Materials Research, 2014, 1017:187-192. (EI)
       12 . Wang Qiuyan, Zhao Wenxiang, Liang Zhiqiang*, Wang Xibin, Wu Yongbo, Jiao Li. Research on Fractal Characterization in Grinding of Monocrystal Sapphire. Materials Science Forum, 2014, 800-801:186-190. (EI).
       13 . Wang, B.B., Xie, L.J., Wang, X.B., Chen, X.L., Simulation studies of the cutting process on SiCp/Al composites with different volume fraction of reinforced SiC particles, Materials Science Forum, v 800-801, p 321-326. 2014
       14 . Wang, T., Xie, L., Wang, X., A comparative study of high speed orthogonal turning of AISI4340 by three different finite element models, Key Engineering Materials, v 589-590, p 111-116., 2014 6. 
       15 . Yan Pei, Deng Jianxin, Rong Yiming. Performance of PVD (Zr,Ti)N coated cemented carbide inserts in cutting processes. International Journal of Advanced Manufacturing Technology, 2014, 73(9-12): 1363-1371.
    • • List of major core journal papers in 2013
    1 . Liang Z, Wang X, Wu Y, et al. An investigation on wear mechanism of resin-bonded diamond wheel in Elliptical Ultrasonic Assisted Grinding (EUAG) of monocrystal sapphire. Journal of Materials Processing Technology, 2012, 212(4):868-876.
       2 . Tianfeng Zhou, Jiwang Yan, Kuriyagawa Tsunemoto. Size effects on transferability and mold change of glass molding press for microgrooves, Advanced Materials Research, Vol.497 (2012), pp.235-239.
       3 . Shimada Keita; Liew Payjun, Zhou Tianfeng, Yan Jiwang, Kuriyagawa Tsunemoto. Statistical Approach Optimizing Slant Feed Grinding, Journal of Advanced Mechanical Systems and Manufacturing, Vol. 6, No.6 (2012), pp.898-907.
       4 . Nishikawa Chihiro, Mizutani Koichi, Zhou Tianfeng, Yan Jiwang, Kuriyagawa Tsunemoto. Investigation of particle impact phenomena in powder jet deposition process, Key Engineering Materials, Vols. 523-524 (2012), pp.184-189.
       5 . Peng Yao*, Yadong Gong, Takeshi Matsuda, Tianfeng Zhou, Jiwang Yan, Tsunemoto Kuriyagawa. Investigation of wheel wear mechanisms during grinding optical glasses through statistical analysis of wheel topography, International Journal of Abrasive Technology, Vol.5, No.1, pp.33-47, 2012. (EI). 
       6 . Tianfeng Zhou*, Jiwang Yan, Kuriyagawa Tsunemoto. Size effects on transferability and mold change of glass molding press for microgrooves, Advanced Materials Research, Vol.497, pp.235-239, 2012. (EI)
       7 . Guo Hong, Pang Siqin, Yan Xianguo, Zhang Rong. Research on the Design Method of Component-based Modular Fixture. Applied Mechanics and Materials, 2012, 215-216:197-201.
       8 . Liang Zhiqiang*, Wang Xibin, Wu Yongbo, Xie Lijing, Liu Zhibing, Zhao Wenxiang. An Investigation on Wear Mechanism of Resin-bonded Diamond Wheel in Elliptical Ultrasonic Assisted Grinding (EUAG) of Monocrystal Sapphire. Journal of Materials Processing Technology, 2012, 212: 868-876.
    • • List of major core journal papers in 2012
    1 . Liang Z, Wang X, Wu Y, et al. An investigation on wear mechanism of resin-bonded diamond wheel in Elliptical Ultrasonic Assisted Grinding (EUAG) of monocrystal sapphire. Journal of Materials Processing Technology, 2012, 212(4):868-876. (SCI影响因子:2.236)
       2 . Tianfeng Zhou, Jiwang Yan, Kuriyagawa Tsunemoto. Size effects on transferability and mold change of glass molding press for microgrooves, Advanced Materials Research, Vol.497 (2012), pp.235-239.
       3 . Shimada Keita; Liew Payjun, Zhou Tianfeng, Yan Jiwang, Kuriyagawa Tsunemoto. Statistical Approach Optimizing Slant Feed Grinding, Journal of Advanced Mechanical Systems and Manufacturing, Vol. 6, No.6 (2012), pp.898-907.
       4 . Nishikawa Chihiro, Mizutani Koichi, Zhou Tianfeng, Yan Jiwang, Kuriyagawa Tsunemoto. Investigation of particle impact phenomena in powder jet deposition process, Key Engineering Materials, Vols. 523-524 (2012), pp.184-189.
       5 . Peng Yao*, Yadong Gong, Takeshi Matsuda, Tianfeng Zhou, Jiwang Yan, Tsunemoto Kuriyagawa. Investigation of wheel wear mechanisms during grinding optical glasses through statistical analysis of wheel topography, International Journal of Abrasive Technology, Vol.5, No.1, pp.33-47, 2012. (EI). 
       6 . Tianfeng Zhou*, Jiwang Yan, Kuriyagawa Tsunemoto. Size effects on transferability and mold change of glass molding press for microgrooves, Advanced Materials Research, Vol.497, pp.235-239, 2012. (EI)
       7 . Guo Hong, Pang Siqin, Yan Xianguo, Zhang Rong. Research on the Design Method of Component-based Modular Fixture. Applied Mechanics and Materials, 2012, 215-216:197-201.
       8 . Liang Zhiqiang*, Wang Xibin, Wu Yongbo, Xie Lijing, Liu Zhibing, Zhao Wenxiang. An Investigation on Wear Mechanism of Resin-bonded Diamond Wheel in Elliptical Ultrasonic Assisted Grinding (EUAG) of Monocrystal Sapphire. Journal of Materials Processing Technology, 2012, 212: 868-876.
    • • List of major core journal papers in 2011
    1 . Tianfeng Zhou*, Jiwang Yan, Jun Masuda, Kuriyagawa Tsunemoto. Ultraprecision mass fabrication of aspherical Fresnel lens by glass molding press, Advanced Materials Research, Vol.325, pp.713-718, 2011. (EI)
        2 . Keita Shimada*, Tianfeng Zhou, Jiwang Yan, Tsunemoto Kuriyagawa. Statistical approach calculating ground surface roughness of ultrasonic-assisted micro-grinding, Advanced Materials Research, Vol.325, pp.600-605, 2011. (EI)
       3 . Peng Yao*, Takeshi Matsuda, Tianfeng Zhou, Jiwang Yan, Tsunemoto Kuriyagawa, Yadong Gong. On-machine measurement and statistical analysis of wheel wear after grinding optical glass, Advanced Materials Research, Vol.325, pp 653-658, 2011. (EI)
       4 . Peng Yao*, Yadong Gong, Suoxian Yuan, Tianfeng Zhou, Jiwang Yan, Tsunemoto Kuriyagawa. Thermal analysis of laser irradiation of fused silica, Advanced Materials Research, Vols.314-316, pp.1960-1964, 2011. (EI)
       5 . Jun Masuda, Jiwang Yan*, Tianfeng Zhou, Tsunemoto Kuriyagawa, Yasushi Fukase. Thermally induced atomic diffusion at the interface between release agent coating and mould substrate in a glass moulding press, Journal of Physics D: Applied Physics, Vol.44, 215302 (12pp), 2011. (SCI, EI)
       6 . Tianfeng Zhou*, Jiwang Yan, Jun Masuda, Takashi Oowada, Tsunemoto Kuriyagawa. Investigation on shape transferability in ultraprecision glass molding press for microgrooves, Precision Engineering, Vol.35, pp.214-220, 2011. (SCI, EI)
       7 . Liang Zhiqiang*, Wang Xibin, Wu Yongbo. Experimental investigations of elliptical ultrasonic assisted grinding (EUAG) of monocrystal sapphire. International Journal of Abrasive Technology, 2011, 4(4): 279–289. (EI: 20120914804111)
    • • List of major core journal papers in 2010
    1 . Tianfeng Zhou, Jiwang Yan, Tsunemoto Kuriyagawa. Comparing microgroove array forming with micropyramid array forming in the glass molding press, Key Engineering Materials, Vols. 447-448 (2010), pp.361-365.
       2 . Tianfeng Zhou, Jiwang Yan, Nobuhito Yoshihara, Tsunemoto Kuriyagawa. Study on nonisothermal glass molding press for aspherical lens, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 4, No. 5 (2010), Special Issue on Advanced Manufacturing Technology (LEM21), pp.806-815.

  • • "Invention patents" or "national defense patents" that have been authorized and converted or applied during the period of 2011.1.1-2015.12.31"
    No. Inventors Patent Application Number Patent Number Authorization Time
    1 Wang Xibin, Li Shenwang, Xie Lijing, Liu Yanchen A compound CNC milling machine 2013100138411 ZL2013100138411 20150218
    2 Wang Xibin, Li Shenwang, Xie Lijing, Wang Tao Specialized miller for difficult-to-cut materials 2013100137758 ZL2013100137758 20150121
    3 Wang Xibin, Li Shenwang, Xie Lijing, Zhang Haoqiang A planetary milling cutting tool 201210160584X ZL201210160584X 20140108
    4 Wang Xibin, Li Shenwang, Xie Lijing, Wang Tao Differential stepless speed-regulation multi-mode rolling-cutting machine tools 2013100137758 ZL2013100137758 20150121
    5 Wang Xibin, Li Shenwang, Xie Lijing, He Lilun  
    A design method of compound planets milling system 
    2013100138661 ZL2013100138661 20130930
    6 Fang Zeping, Wang Xibin, Liu Zhibing A micro ball end Mill and its manufacturing method      
    7 Fang Zeping, Wang Xibin, Liu Zhibing A measuring method for tribology characteristics of cutting based on point contact open-close and Pin-disc friction system      

▪ Software copyright,from January 1, 2011 to December 31, 2015
No. Copyright Owner Software Name Completion Date Release Date Registration Number
1 Beijing Institute of Technology The high speed cutting database system for high strength and high hardness material 20110401 20110420 2011SRBJ2364
2 Beijing Institute of Technology The rolling process management system of torsion shaft 20120910 20120921 2013SR041266
3 Beijing Institute of Technology Johnson-Cook constitutive modelling system 20120810 20120814 2012SRBJ1097
4 Beijing Institute of Technology PRMMC-CUT2D V1.1 20140606+D288 20140811 2014SR117631
5 Beijing Institute of Technology MSG-VUMAT 20140804 20141210 2014SR191664

 

Project
  • National Level
  • Important Level

No. Project Leader Project Funder Project Number Starting and Ending Date
1  Wang Xibin Basic research on precision manufacturing of micro and complex structure National Security Basic Research Program of China XXXXX 201201-201612
2  Wang Xibin Micro machining technology of micro and high load carrying metal parts National Key program of advance research of China XXXXX 201101-201512
3  Wang Xibin High speed machining and application of high-strength steel, hardened steel and high stiffness SiCp/Al Composite National Science and Technology Major Project 2009ZX04014-044 200903-201112
4  Wang Xibin Design theory of micro machining tool and base manufacturing technology of micro milling and drilling tools The State Key Program of National Natural Science Foundation of China 50935001 201001-201312
5  Wang Xibin Design theory and manufacturing technology of turning tool and gear cutter hob for micro machining National Natural Science Foundation of China 50875026 200901-201112
6 Zhou Tianfeng Fundamental Research on High-efficiency and Ultra-precision Molding for Glass Micro-nano Array National Key Basic Research Program of China 2015CB059900 201501-201908
7 Zhou Tianfeng Mold manufacture method and its key technologies for optical microstructure array molding press National Natural Science Foundation of China 51375050 201401-2017.12
8 Xie Lijing Reliability evaluation, design and application research of High precision milling cutting tools Subproject of National Subproject of Science and Technology Major Project 2012ZX04003051-3  201201-201412
9 Xie Lijing Experimental conditions construction for the study on high performance machining technology and equipment of Difficult-to-Cut materials National Science and Technology Major Project 2011ZX04016031-002 201101-201306
10 Jiao Li
Research on the cutting physical data service technology of
ultra-high strength steel machining
National Natural Science Foundation of China 51575050 201601-201912
11 Jiao Li Research on the development tendency and the physical foundation for the typical material cutting database National Natural Science Foundation of China 51445006 201408-201412
12 Jiao Li Research on machining deformation simulation and prediction for milling of thin-walled strip box National Natural Science Foundation of China 51105035 201201-201412
13 Liu Zhibing 1. Research on Micro Cutting and Turn-milling Technology of Meso Scale Workpiece National Natural Science Foundation of China 51005023 201101-201312
14 Liu Zhibing Fundamental Research on Adaptive Design of Cutter for Five-Axis Flank Milling of Integral Enclosed Impeller National Natural Science Foundation of China 51375055 201401-201712
15 Zhiqiang Liang Research on an ultrasonic spatial helical grinding method and mechanism of optical crystal materials National Natural Science Foundation of China 51205024 201301-201512
16 Zhiqiang Liang Design and Fabricatin of High Aspect Ratio Micro-drills and Ultrasonic Cavitation Drilling National Natural Science Foundation of China 51575049 201601-201912

 



No. Project Leader Project Contract Award Date Starting and Ending Date
1 Li Jiao Research on application of integrated manufacturing technology 201012 201001-201112
2 Li Jiao Research on numerical control machining for difficult-to-machine material and aluminum alloy  201112 201101-201512
3 Li Jiao Research on high efficiency machining technology for difficult-to-machine material  201412 201401-201412
4 Zhou Tianfeng Beijing Natural Science Foundation of China 201401 201401-201612
5 Zhou Tianfeng BIT Major project cultivation program  201401 201401-201612
6 Xie Lijing Key manufacturing technology of torsion shaft 201112 201101-201512

 

 

Official Website Of Advanced Machining Technology Lab,Beijing Institute of Technology

Address:5 Zhongguancun South Street, Haidian District, Beijing Zip
Postal Code:100081     Technical support:Pageadmin
Copyright:Website Management System Of Advanced Machining Technology Lab
Management Maintenance:Website Management System Of Advanced Machining Technology Lab